Basic Info.
Application
Nc Machine Tool
Number of Stator
Two-Phase
Excitation Mode
HB-Hybrid
Function
Driving, Canopen
Operate Mode
The Three Single Phase
Certification
ISO9001, CE, RoHS
Name
Integrated Stepper Motor
Product Description
2phase 1.2-3N.m holding torque Nema23 Integrated Drive Stepper Motor RS485 or CANopen
Open New Avenues With High Performance Integrated Stepper Motors from Clarke motion , Contact Us to Learn About Our Integrated Stepper Motors Solutions, Built to Meet Your Needs. Expert Customer Support. Customized Configurations. High Endurance.
Features of Servo Integrated Stepper Motor:
- Modbus stepper driver: 24 ~ 50V DC power supply, 5.0A output current peak.
- With the built-in S motion profile acceleration and deceleration can be set separately.
- Low Noise: Based on advanced control algorithm, the motor driver can run with low noise and low vibration
- Application: This NT60 stepper motor driver can control almost all of 2 phase nema 23/24 stepper motors 57/60mm flange whose current is under 5.0A. Usually for production line, Li-on battery equipment, solar energy equipment, 3C electrical equipment, etc.
- Warranty: Our step driver CNC controller has 12 months warranty. CE, ISO Certificated
Genaral Specification of Nema23 stepper motor:
- Step angle:1.8°
- Temperature rise:below 80 ºC
- Ambient temperature:-20 ºC ~ + 50 ºC
- Insulation resistance:minimum 100MΩ, 500VDC
- Dielectric strength:500VAC for 1 minute
- Shaft radial clearance 0.02 max (450 g load)
- Shaft axial clearance:0.08Max. (450 g load)
- Maximum radial force:75N (20mm from flange)
- Maximum axial force:15N
- size:Approximately 57x57mm
Stepper Motor Specification:
Step Angle Accuracy: ±5%
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80°C Max
Ambient Temperature: -20°C~+50°C
Insulation Resistance: 100MΩ Min., 500VDC
Dielectric Strength: 500VAC for one minute
Shaft Radial Play: 0.02Max (450g-load)
Shaft Axial Play: 0.08Max (450g-load)Specification:| Model No. | Step Angle | Motor Length | Current
/Phase | Resistance
/Phase | Inductance
/Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
| ( °) | (L)mm | A | Ω | mH | N.m | No. | g.cm | g.cm2 | Kg |
| 57HS41-1006 | 1.8 | 41 | 1 | 7.1 | 8 | 0.48 | 6 | 250 | 150 | 0.47 |
| 57HS41-2008 | 1.8 | 41 | 2 | 1.4 | 1.4 | 0.39 | 8 | 250 | 150 | 0.47 |
| 57HS41-2804 | 1.8 | 41 | 2.8 | 0.7 | 1.4 | 0.55 | 4 | 250 | 150 | 0.47 |
| 57HS51-1006 | 1.8 | 51 | 1 | 6.6 | 8.2 | 0.72 | 6 | 300 | 230 | 0.59 |
| 57HS51-2008 | 1.8 | 51 | 2 | 1.8 | 2.7 | 0.9 | 8 | 300 | 230 | 0.59 |
| 57HS51-2804 | 1.8 | 51 | 2.8 | 0.83 | 2.2 | 1.01 | 4 | 300 | 230 | 0.59 |
| 57HS56-2006 | 1.8 | 56 | 2 | 1.8 | 2.5 | 0.9 | 6 | 350 | 280 | 0.68 |
| 57HS56-2108 | 1.8 | 56 | 2.1 | 1.8 | 2.5 | 1 | 8 | 350 | 280 | 0.68 |
| 57HS56-2804 | 1.8 | 56 | 2.8 | 0.9 | 2.5 | 1.2 | 4 | 350 | 280 | 0.68 |
| 57HS64-2804 | 1.8 | 64 | 2.8 | 0.8 | 2.3 | 1 | 4 | 400 | 300 | 0.75 |
| 57HS76-2804 | 1.8 | 76 | 2.8 | 1.1 | 3.6 | 1.89 | 4 | 600 | 440 | 1.1 |
| 57HS76-3006 | 1.8 | 76 | 3 | 1 | 1.6 | 1.35 | 6 | 600 | 440 | 1.1 |
| 57HS76-3008 | 1.8 | 76 | 3 | 1 | 1.8 | 1.5 | 8 | 600 | 440 | 1.1 |
| 57HS82-3004 | 1.8 | 82 | 3 | 1.2 | 4 | 2.1 | 4 | 1000 | 600 | 1.2 |
| 57HS82-4008 | 1.8 | 82 | 4 | 0.8 | 1.8 | 2 | 8 | 1000 | 600 | 1.2 |
| 57HS82-4204 | 1.8 | 82 | 4.2 | 0.7 | 2.5 | 2.2 | 4 | 1000 | 600 | 1.2 |
| 57HS100-4204 | 1.8 | 100 | 4.2 | 0.75 | 3 | 3 | 4 | 1100 | 700 | 1.3 |
| 57HS112-3004 | 1.8 | 112 | 3 | 1.6 | 7.5 | 3 | 4 | 1200 | 800 | 1.4 |
| 57HS112-4204 | 1.8 | 112 | 4.2 | 0.9 | 3.8 | 3.1 | 4 | 1200 | 800 | 1.4 |
FAQ:
1. Can you make the gearbox or Gearmotor with custom specifications?
YES. We have strong R&D capability, also a significant term of engineers, each of them has many work years experience.
2. Do you provide the samples?
YES. Our company can provide the samples to you
3. Do you provide technical support?
YES. Our company have strong R&D capability, we can provide technical support if you need.
4. why should you buy from us and not from other suppliers?
Professional one-to-one motor customized. The world's large enterprise of choice for high-quality suppliers. ISO9001:2008 quality management system certification, through the CE, ROHS certification.
5. How to ship to us?
We will ship the samples to you according to the DHL or UPS or FEDEX etc account you provide.
6. How can I know if the product is suitable for me?
First, you need to provide us the more details information about the product. We will recommend the item to you according to your specification requirement. After you confirm, we will prepare the samples for you. also we will offer some promising advances according to your product use.
Address:
Room 1521, Apartment B-1, Taifu City, No. 19 Guangdian Middle Road, Hutang Town, Wujin District, Changzhou City, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
